185 lines
30 KiB
Plaintext
185 lines
30 KiB
Plaintext
Copyright 1986-2022 Xilinx, Inc. All Rights Reserved. Copyright 2022-2023 Advanced Micro Devices, Inc. All Rights Reserved.
|
|
---------------------------------------------------------------------------------------------------------------------------------------------
|
|
| Tool Version : Vivado v.2023.1 (win64) Build 3865809 Sun May 7 15:05:29 MDT 2023
|
|
| Date : Sun Aug 4 13:44:18 2024
|
|
| Host : 840-5CG14025H4 running 64-bit major release (build 9200)
|
|
| Command : report_drc -file c64pro_top_drc_routed.rpt -pb c64pro_top_drc_routed.pb -rpx c64pro_top_drc_routed.rpx
|
|
| Design : c64pro_top
|
|
| Device : xc7z010clg400-2
|
|
| Speed File : -2
|
|
| Design State : Fully Routed
|
|
---------------------------------------------------------------------------------------------------------------------------------------------
|
|
|
|
Report DRC
|
|
|
|
Table of Contents
|
|
-----------------
|
|
1. REPORT SUMMARY
|
|
2. REPORT DETAILS
|
|
|
|
1. REPORT SUMMARY
|
|
-----------------
|
|
Netlist: netlist
|
|
Floorplan: design_1
|
|
Design limits: <entire design considered>
|
|
Ruledeck: default
|
|
Max violations: <unlimited>
|
|
Violations found: 26
|
|
+-----------+----------+----------------------------+------------+
|
|
| Rule | Severity | Description | Violations |
|
|
+-----------+----------+----------------------------+------------+
|
|
| CHECK-3 | Warning | Report rule limit reached | 1 |
|
|
| REQP-1839 | Warning | RAMB36 async control check | 20 |
|
|
| REQP-1840 | Warning | RAMB18 async control check | 4 |
|
|
| RTSTAT-10 | Warning | No routable loads | 1 |
|
|
+-----------+----------+----------------------------+------------+
|
|
|
|
2. REPORT DETAILS
|
|
-----------------
|
|
CHECK-3#1 Warning
|
|
Report rule limit reached
|
|
REQP-1839 rule limit reached: 20 violations have been found.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#1 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENARDEN (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/enb) which is driven by a register (u_pl_top/u_rhs2116_top/transmit_arrange[0].u_trans_arrange/s_axi_cmd_tready_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#2 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENBWREN (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[0]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#3 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENBWREN (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#4 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENBWREN (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[2]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#5 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENBWREN (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#6 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENBWREN (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/is_end_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#7 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENBWREN (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/recv_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#8 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[4] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[0]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#9 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[5] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[0]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#10 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[5] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#11 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[5] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[2]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#12 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[5] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#13 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[5] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/is_end_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#14 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[5] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/recv_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#15 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[6] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[0]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#16 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[6] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#17 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[6] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[2]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#18 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[6] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/chipset_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#19 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[6] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/is_end_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#20 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/WEBWE[6] (net: u_pl_top/u_rhs2116_top/u_trans_distribute/output_fifo[0].u_axis_data_fifo_if_recv/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_rhs2116_top/u_trans_distribute/recv_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#1 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_pl_top/u_rhs2116_top/u_sine_wave_gen/u_dds_stim_16ch/U0/i_synth/i_dds/I_SINCOS.i_std_rom.i_rom/i_rtl.i_double_table.i_block_rom.i_pipe_1.pre_asyn_sin_RAM_op_reg has an input control pin u_pl_top/u_rhs2116_top/u_sine_wave_gen/u_dds_stim_16ch/U0/i_synth/i_dds/I_SINCOS.i_std_rom.i_rom/i_rtl.i_double_table.i_block_rom.i_pipe_1.pre_asyn_sin_RAM_op_reg/ENARDEN (net: u_pl_top/u_rhs2116_top/u_sine_wave_gen/u_dds_stim_16ch/U0/i_synth/i_dds/I_SINCOS.i_std_rom.i_rom/aclken) which is driven by a register (u_pl_top/u_rhs2116_top/u_sine_wave_gen/aclken_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#2 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENARDEN (net: u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/wea[0]) which is driven by a register (u_pl_top/u_upload_top/u_upload_sort/m_axis_eegY_tvalid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#3 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENBWREN (net: u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/enb) which is driven by a register (u_pl_top/u_upload_top/u_upload_protocol_intan/s_axis_eeg_tready_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#4 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg has an input control pin u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/gen_wr_a.gen_word_narrow.mem_reg/ENBWREN (net: u_pl_top/u_upload_top/u_upload_sort/u_axis_data_fifo_w8_d128/inst/gen_fifo.xpm_fifo_axis_inst/xpm_fifo_base_inst/gen_sdpram.xpm_memory_base_inst/enb) which is driven by a register (u_pl_top/u_upload_top/u_upload_protocol_ql/s_axis_eeg_tready_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
RTSTAT-10#1 Warning
|
|
No routable loads
|
|
55 net(s) have no routable loads. The problem bus(es) and/or net(s) are u_ps_a9_1/design_a9_1_i/axi_smc/inst/m00_nodes/m00_r_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m01_nodes/m01_w_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m02_nodes/m02_b_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m02_nodes/m02_w_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m03_nodes/m03_ar_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m04_nodes/m04_b_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m04_nodes/m04_r_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m06_nodes/m06_w_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m07_nodes/m07_aw_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m08_nodes/m08_b_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m08_nodes/m08_w_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m09_nodes/m09_ar_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m09_nodes/m09_aw_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m09_nodes/m09_b_node/inst/mi_handler_m_sc_areset_pipe,
|
|
u_ps_a9_1/design_a9_1_i/axi_smc/inst/m09_nodes/m09_w_node/inst/mi_handler_m_sc_areset_pipe
|
|
(the first 15 of 55 listed nets/buses).
|
|
Related violations: <none>
|
|
|
|
|